PASS/EQUIP → Working with PASS/EQUIP → View and Standard views toolbars
Table 1 describes the functions of the “View” and “Standard views” toolbar icons.
Table 1
Icon (name) | Function | |
Front view | Full-screen model display in Z-Y plane (X-axis pointed away from screen) | |
Back view | Full-screen model display in Z-Y plane (X-axis pointed toward screen) | |
Left-side view | Full-screen model display in X-Y plane (Z-axis pointed away from screen) | |
Right-side view | Full-screen model display in X-Y plane (Z-axis pointed toward screen) | |
Top view | Full-screen model display in Z-X plane (Y-axis pointed toward screen) | |
Bottom view | Full-screen model display in Z-X plane (Y-axis pointed away from screen) | |
Isometric view | Full-screen isometric model display | |
Fit to the screen size | Full-screen model display in current view | |
Zoom in | Zoom in using the left mouse button | |
Zoom in/zoom out | Zoom in/out by moving the cursor up or down using the left mouse button | |
Rotate around axis | Rotate model around axis by holding down the left mouse button and moving the cursor | |
Rotate around selected point | Rotate model around selected point by holding down the left mouse button and moving the cursor | |
Move | Move model using the left mouse button | |
Cancel view | Return to previous view (before rotation, zoom, moving) | |
Repeat view | Repeat cancelled view change (rotation, zoom, moving) | |
Solid | Display model as a solid, 3D object | |
Gradient | Display model in gradient (semitransparent) mode | |
Beam | Display model as transparent beam | |
Display filling | Display of calculated filling as translucent volume | |
Insulation and lining view | Display of created volumes of insulation and lining | |
Display service plaforms | Display or hide sites existing in the model | |
Colors by materials | Highlighting of components by color according to the “Materials using” panel | |
Perspective view | Display model in perspective view | |
Dimensions | Display dimensions of model components | |
Elevation labels | Display elevation labels of shells, nozzles and platforms, stiffening rings | |
Product level marks | Display product level marks by cavities | |
Labels | Display model with component labels | |
Origin point | Display origin point of solid model (relating to it, barycenters of components are calculated) | |
Fine generation of model | The solid model is created in detail that can retard the work in case your computer is too slow | |
Accelerated model generation | Some components of solid model are created more simply | |
No model rebuild | Model rebuilding is blocked. | |
Regenerate model | Forced rebuilding of the model with the elimination of artifacts left over from previous incomplete rebuilds | |
Moving down of the component in the current branch (Ctrl-) | Changing position of the selected component in the model hierarchy relating to the components of the same level. This option is available only for daughter components (nozzles, rings, etc.) | |
Moving up of the component in the current branch (Ctrl+) |
For quick move , zoom and rotation of the model, you can also use left, right and middle mouse buttons, respectively, while pressing the "Ctrl" key. To rotate the model around a selected point , you can use the right mouse buttonwhile pressing the "Ctrl" and"Shift" keys together.
When rotating the model around a selected point , X and Y coordinates (in the coordinate system of the screen) are determined by the mouse cursor position, while the Z coordinate ("depth") is determined by the current depth of non-transparent model component under the mouse cursor. If no non-transparent components are present under the mouse cursor, Z coordinate is set as equal to model's average depth.