PASS/EQUIP → Working with PASS/EQUIP → Data input → Vertical steel tank for oil and oil products → Tank roof
Fig. 1. Tank roof
Style, material and type of connection with wall are set.
When calculating according to API 650, the following options are available for joining the roof to the wall (Fig. 2):
Fig. 2. Roof-to-wall joining types as per API 650
The calculation of the supported roof strength and buckling is not performed in the current version of the program; only weight loads due to metal structures are taken into account. The weight of the frame roof can be specified in various ways:
manually (weight value is specified);
by the attached frame (it is necessary to prepare the frame model in a third-party CAD system similarly to the “Custom equipment” component (Fig.3);
by supported roof designer tool.
Fig. 3. Imported roof frame model
Tank bottom parameters can be set by selecting button .