Smart Simulation & Sizing Tools for Every Piping and Equipment Engineer/Designer

29 November 2019

Register for PASS/START-PROF Overview Webinars, 12 December 2019

We invite process, piping and mechanical engineers and designers to join our overview webinars on PASS/START-PROF!

Date: 12 December 2019

3 options are available for different locations:
11:30-13:00 IST (UTC +5:30) – for India, Asia and Australia (APAC)
11:00-12:30 CET (UTC +1:00) – for Europe, Middle East and Africa (EMEA)
11:30-13:00 AST (UTC -4:00) – for Canada, USA and Latin America (AMER)

Duration: 1.5 hours
Cost: Free
Registration: pre-registration is required

During the webinars, we will present main features of PASS/START-PROF, the software providing comprehensive stress, flexibility, stability, and fatigue strength analysis with related sizing calculations for buried and above ground, HDPE, FRP/GRP/GRE, vacuum, high pressure, high temperature, and cryogenic piping systems.

  1. Brief START-PROF Software History
  2. Model Creation Tools
  3. Modeling Supports, Checking Allowable Loads, Checking Stresses
  4. Operation Mode Editor (Load Cases), Seismic, Wind, Snow, Ice Loads
  5. Spring Selection
  6. Expansion Joints Modelling
  7. Flange Leakage Check
  8. Creep Stress Analysis, Self-Cold-Spring Effect Due to Creep
  9. Pressure Vessel, Column, Tank Modelling
  10. Buried Piping Analysis
  11. FRP/GRP/GRE Piping Stress Analysis
  12. HDPE Piping Stress Analysis
  13. ASME B31J Implementation
  14. Finite element Analysis of Tees, Laterals with D/t>100
  15. Import from CAESAR II

Presenter: Alex Matveev, Ph.D. PASS/Start-Prof Development, Support & Training Since 2005

Choose one of the options:
Register for APAC Webinar Register for EMEA Webinar Register for AMER Webinar

Register now!